Unique Stitch

Test each type of fabric to be bonded before starting project. Some fabrics require pre-washing to remove factory finish in order to achieve a good bond. Some 100% polyester fabrics, laces and sheers will show a stain or will not bond properly. Some fabric dye may weaken the strength of the bond.

TO OPEN:

1. Protect work surface with a paper towel.
2. Unscrew cap.
3. Tube is ready to use.
4. Gently squeeze tube from the bottom.
5. If tip becomes clogged, use a stright pin to clean nozzle.
6. Replace cap when not in use.

TO APPLY:

1. Place a piece of aluminum foil under fabric before applying Unique Stitch® to prevent seepage onto work surface.
2. Squeeze directly from tube onto back of item to be adhered. Sheer and lightweight fabrics need only a light application of adhesive.
3. Smooth adhesive with finger or small brush. Make sure adhesive is spread evenly to outer edges.
4. Use gentle finger pressure to position item to be adhered. Allow bond to set a few minutes then apply heavy pressure and allow to set for 30 minutes before ironing or wearing.
5. DO NOT WASH FOR 24 HOURS AFTER BONDING.

Once dry, the bond is permanent and garment can be washed and machine dried. Some fabrics hold the bond through dry cleaning; others do not.

For any safety data sheets, please refer to the following files:

MSDS_Liquid_Stitch_Original_SDS.pdf