Loop Turner

Item Number: 11701 UPC: 072879286748 Categories: ,

The Dritz® loop turner is a handy sewing tool used for turning bias tubing, button loops, frog closures, Chinese ball buttons, purse straps and shoulder straps.

Quantity: 1 PC

  1. Width: Cut bias fabric strip two times desired finished width of tube, plus 1/2″ for seam allowance. Length: Add 2-3″ to desired finished length for turning.
  2. Fold fabric widthwise, right sides together and stitch a 1/4″ seam.
  3. Trim seam allowance and cut one end of tube at an angle.
  4. Insert loop turner through tube and push latch through fabric about 1/4′ from point.
  5. Pull loop turner toward you, guiding fabric over hook until it begins to turn inside out. Continue to pull loop turner, being careful not to disengage hook.

TIP: Use Loop Turner to pull serger tails back through serger stitching!

You can find this product in these various stores. Please note, we are unable to check product availability in stores, so please call or check the store's website before attempting to purchase.

Find Your Nearest Store